JBL BPX1100.1 1100W Mono Amplifier


JBL BPX1100.1 1100W Mono Amplifier

Car Audio Code: 11587
£492.75

Next Day Delivery Available If Ordered Before 4pm
1 Year Manufacturer Warranty
Lifetime Technical Support
If you find it cheaper - Please Give Us A Call

Unlike conventional mono subwoofer amplifiers that only deliver their maximum power into a single impedance, the BPX1100.1 and BPX2200.1 are two-channel amplifiers that can be bridged to deliver double the voltage of a single channel into impedances between 2 and 4 ohms. The two channels can also be connected in parallel - that's right, parallel - to provide double the current of single channel into impedance below 2 ohms. This feature is patented and unprecidented in car audio amplification. Thanks Crown!

Slope-selectable variable electronic crossovers - Both the BPX1100.1 and BPX2200.1 is equipped with a variable electronic crossover capable of setting the slope rate at 12dB or 24dB per octave. The crossover adjustment range is 32Hz - 320Hz.

Dynamic Bass Optimization (DBO) - This provides variable filtering with adjustable "Q" below 100Hz, far beyond conventional "Bass Q" circuits, by allowing the low-frequency output to be optimized for specific subwoofer applications. Frequencies below an enclosure''s tunign frequency can be attenuated, preventing damage to the subwoofer and allowing the amplifier's power to be better utilized.

Both the BPX1100.1 and BPX2200.1 come equipped with a remote bass level control allowing you to optimize bass output for specific music or preferences from the driver's position.

Full-range preamp outputs - In the event that multiple amplifiers are used in an application, this feature allows for streamlined system hookup. No high-loss Y-adapters or splitteres needed.

  • 1100W x 1 into 2 ohms
  • 1100W x 1 into 4 ohms, series-bridged
  • 1100W x 1 into 1 ohm, parallel-bridged
  • Max Power : 2200W Peak
  • Signal-to-Noise Ratio : >93dB
  • Total Harmonic Distortion : 0.5%
  • Frequency Response : 10Hz - 200Hz +0dB, -3dB
  • Built-in variable electronic crossover with selectable slope
  • Dynamic Bass Optimization (DBO) circuit
  • Preamp outputs
  • Differential inputs
  • High damping factor
  • Internal-lighting-ready
  • Direct-Connect
  • Remote level control included
  • Dimensions (H x W x D) : 17" x 12-1/4" x 2-9/16"
No technical details available
Review not available
0870 170 3970
Items: 0 | Total: £0.00